DAY and NIGHT shift positions. 8am - 8pm or 8pm - 8am continental shift.
This is a skilled industrial electrician position at the journeyman level. This position requires skills in trouble shooting and maintaining industrial automation and controls.
Builds, installs, maintains, troubleshoots, and repairs electrical control systems associated with new and existing industrial machinery.
Interact with use of the CMMS (ER Portal) to open, perform and complete work orders issued by the Group Leader or Planner Scheduler.
Assists fellow maintenance electricians, maintenance technicians, and contract integrator/engineers in the installation, trouble shooting and repair of equipment.
Installs, programs, trouble shoots, and maintains AC and DC drives.
Experience with the following a bonus: Rockwell logic 5000 software, AB Control logic PLC, AB 700/750 series drives, Siemens S120 series drives, Siemens 6RA series DC drives, Siemens S7 series PLC, eR Portal CMMS, Auto CAD.
Must be familiar with and understand the proper use of the test instruments used in this position:
- Fluke multi-meter
- Fluke amp-meter
- Fluke oscilloscope
- Fluke mega ohm-meter
- Fluke “J” and “K” type thermometers
- Fluke infra-red heat gun
Ability to read and draw schematic diagrams associated with ladder logic, electrical device installation and function.
Minimum education required:
High school or GED, Completion of Basic Electronic-College or Technical. Industrial Electronics Maintenance Technology-Technical degree or equivalent.
Minimum experience required:
Four years experience in the electrical trade, including completion of an apprenticeship. Considerable knowledge of the practice, methods, tools, equipment, and materials of the electrical trade. Knowledge of applicable electrical codes. Skilled in the use and care of tools and equipment used in the electrical trade. Skilled in locating and adjusting defects in electrical systems and equipment. The ability to understand and follow oral and written instructions and to read and interpret sketches, diagrams, and blueprints.
Description Of Working Conditions/physical Surroundings
- Must be able to sit, crawl, stand, walk, bend, stoop, twist, reach, crouch, kneel and climb frequently (25% to 75%).
- Must be able to lift and carry 10-50 lbs. frequently and over 50 lbs. occasionally (25% or less).
- Must be able to push and pull 10-50 lbs. frequently (25% to 75%), and over 50 lbs. occasionally (25% or less).
Shift work: Yes
Employment Type: Full Time
Years Experience: 3 - 5 years
Salary: $33 - $36 Hourly
Bonus/Commission: No
.jpg?w=40&h=40&action=crop)