Solutions overview

Void Support is the use of a geosynthetic as a tensioned membrane to span voids and prevent or minimize the effect of subgrade subsidence.

Veneer Reinforcement is the use of a geosynthetic to reduce the stress from a soil cover on a geomembrane liner at the side slopes of a landfill.

Subgrade Stabilization is the use of geosynthetic reinforcement elements to provide constructability and access over very soft soils. Its use establishes a well-compacted non-yielding platform with uniform load support.

Reinforced Steepened Slopes (RSS) are Mechanically Stabilized Earth (MSE) slopes that provide grade separation with face inclinations flatter than seventy degrees (70°).

TenCate Geosynthetics provides a range of interlayers to extend the useful life of asphalt overlays when they are used on existing cracked pavement surfaces, or to increase the structural capacity of curb and gutter constrained pavement sections.

Liner Protection is the use of a geotextile to protect an impermeable geomembrane liner from damage and puncture during installation and while in operation.

Erosion control is the practice of preventing or controlling water or wind erosion in land development, coastal areas, inland waterways and site construction

Drainage is the natural or artificial removal of surface and sub-surface water from an area. Drainage systems that incorporate geotextile filters retain and prevent fine grains of soil from passing into, and potentially clogging the drainage system.

Dewatering is the use of a Geotube® containment technology to remove water from solid or semi-solid material including soil. Geotube® dewatering technology is used for projects large and small, because of its simplicity and low cost.

Basal Reinforcement is the use of a geosynthetic reinforcement element to stabilize an embankment over soft soils.